Tuesday, August 11, 2015

We've Been Framed and it Feels Good.

 
The Grain Bin House build continues with our first layer of insulation and downstairs framing  this past week. We did hire Sealtite of Fairbury, to do the thin layer of closed cell insulation, a job that only took 2.5 hrs. After all the framing is complete we'll have another company blow in cellulose insulation. Sealtite guys covered the entire inside of the grain bin all the way up to the very top. Due to the in and out curve of the GBH metal walls the depth of the closed cell insulation varied from 1/4 in to almost 1 in. thus the reason we decided on two layers of interior insulation.

 

Fanny's dirty white coat illustrates how nice and bright light green
results of the closed cell insulation.
 
We like working with small local companies and the owners of these two are cousins and were happy to work with each other on our project. We considered using only plain batt insulation which would have been cheaper but we wanted out GBH to be well protected from  Illinois cold winter rains and snows and secure enough to hold in the heat from our rocket mass stove. The closed cell spray on foam we used has a high R value of 6.5 , almost double of the open cell spray on foam plus because of it's glue like properties it adds to the walls structural strength.


Closed cell foam covering the bolts that hold the bin panels together
This type of insulation is an excellent vapor and moisture barrier.


Because of its round stature framing took some creativity but we finally decided on the construction of 2 foot by 9 foot rectangles out of 2x4 lumber. Fortunately my husband is a Keith of all trades, primarily self taught and not afraid to take on something new, like building a house Dorothy's Tin Man would envy



 Each "box" was built separately and then installed inside the GBH. As we've been touting for years, child labor is encouraged on our farm. Below is grandson Wesley helping his papa with some of the frames. The labor can be a bit slow when using this demographic but sure it's free.



Over the years Keith has saved lots of lumber from other buildings we had torn down on our previous farm like chicken houses and goat barns plus pieces from past projects and /or gifts from others who had leftovers from their projects. Thus the framing is a mix of new and old wood.

Kitchen windows will go on the left.
Large window on right will go just behind the steel
barrel of our rocket mass stove heater.

Every other box was attached directly to the metal wall of the bin while alternating boxes were screwed to their neighbor, their neighboring box I mean. Keith pre-drilled holes in GBH wall then while I held the frame in place on the inside he drilled the screws into the wooden frames from the outside. It took a good bit of manpower to attach the frames to the heavy metal of the GB but when all done the framing will be tight and solid.



With the first floor framed in we are now working on the staircase and from there we'll install a large overhead wood beam and several floor joists in order to support the second floor. Then we get to frame in THAT level. The really tricky part will be framing in the slanted ceiling. Lot of long skinny pie pieces!



11 comments:

  1. This is coming together really well. You must be impressed with the work schedule.

    I wouldn't envy doing that ceiling either. I'm assuming there's going to be a second story, by the extra height above the present framing? If so, more jigsaw pieces will be required, but I'm sure you've both got a plan for all that too. :)

    ReplyDelete
    Replies
    1. Yes Chris there will be a second floor which looks up into the slanted eves. One day I imagine a lovely piece of stained glass at the top that we can raise and lower or perhaps a stairway to a turret. Ah, so many ideas, so little money :)

      Delete
  2. Is the spray green insulation pricey?

    ReplyDelete
    Replies
    1. It is more than basic batt insulation but you need less and the R value is greater. At some future point I'll share all out building expenses but it looks like the entire build will be done for less than $30,000

      Delete
  3. So nice to see the progress. And what a great helper you have! Go Wesley! I was wondering about insulation, so that part is interesting and I'm glad to see you'll have it, LOL

    ReplyDelete
    Replies
    1. Our biggest concern is that out GBH might get too warm in the winter thus we have windows strategically placed for ventilation.

      Delete
  4. WOW! I'm loving watching this, it's going to be SO awesome. What a great home you will have and you will truly inspire others!

    ReplyDelete
    Replies
    1. We certainly are getting a large number of drive by gawkers recently. I should be a collection box down by the road.

      Delete
  5. Always nice to see pics of Prince Farming doing his thing. (No shirt? Hubba hubba. ;-D) Will there be a center support up through the GBH to handle the 2nd floor load? Does the insulation have much off- gassing or smell? I check in every day - wouldn't want to miss a thing on this fascinating construction. How are the livestock faring?

    ReplyDelete
    Replies
    1. No smell at all with the insulation not even immediately after applied. Yes we will have a large 8 by 8 beam plus two large 8x 8 posts to support the floor. I'll be posting on them soon. All recycled lumber most over 100 years old

      Delete
  6. Question about screwing the wall framing into the wall of the GBH. How thick is the metal of the outer wall? I can't imagine you now have the ends of screws sticking out of the house.

    ReplyDelete

Comments are good, as long as you're a real person and not some goof telling me how you were cured of hepatitis by snorting a pulverized neon blue crayon. Your comments don't even have to agree with my viewpoint, I love a good discussion, but civility does matter.